| | |
| 3174 | Roughness of reline resin after microwave disinfection: a clinical evaluation
R.C. RIBEIRO, F.E. IZUMIDA, M.F.M. BASSO, E.B. MOFFA, E.T. GIAMPAOLO, and C.E. VERGANI, Universidade Est. Paulista Julio Mesquita, Araraquara, Brazil |
| 3175 | Color stability of reline resin after drinks immersion and disinfection
F.E. IZUMIDA, R.C. RIBEIRO, M.F.M. BASSO, E.T. GIAMPAOLO, A.L. MACHADO, and A.C. PAVARINA, Universidade Est. Paulista Julio Mesquita, Araraquara, Brazil |
| 3176 | Peak temperature, conversion and flexural strength of chairside reline resins
J.M.D.S.N. REIS1, C.E. VERGANI1, J. ERXLEBEN2, A.L. MACHADO1, E.T. GIAMPAOLO1, and A.C. PAVARINA1, 1São Paulo State University - UNESP, Araraquara, Brazil, 2VIPI, Pirassununga, Brazil |
| 3177 | Multi-functional Denture Liner Using Divinyl Sebacate/PEMA Paste
J. TANAKA1, Y. HASHIMOTO2, M. NAKAMURA2, J.W. STANSBURY3, J.M. ANTONUCCI4, and K. SUZUKI1, 1Okayama University, Japan, 2Osaka Dental University, Hirakata Osaka, Japan, 3University of Colorado, Aurora, USA, 4National Institute of Standards and Technology, Gaithersburg, MD, USA |
| 3178 | Physical Characteristics of TiO2 Photocatalyst in Cold Cure Denture Acrylic
E.M. LAI, and A.A. CAPUTO, University of California - Los Angeles, USA |
| 3179 | Flexural Strength of PMMA Modified with Palm-oil Based Polyol
N. SHAHABUDIN, N.H. ABU KASIM, and S.N. GAN, University of Malaya, Kuala Lumpur, Malaysia |
| 3180 | Relationship between impact strength and test method of denture resins
A. TAKAHASHI1, A. HASEGAWA1, A. ANDO2, H. KUMANO2, T. MIYATA2, T. MASUDA2, Y. NAKAMURA2, and Y. TANAKA2, 1GC Dental Products, Kasugai, Japan, 2Aichigakuin University, Nagoya, Japan |
| 3181 | Influence of Water Temperature on Flexural Strength of Acrylic Resins
T. TAKAMIZAWA, T. MAEDA, Y. ENDO, T. WATANABE, A. RIKUTA, S. ANDO, and M. MIYAZAKI, Nihon University, Tokyo, Japan |
| 3182 | Effects of Silver-Nano Particles on Denture Base Resins
J.-M. BAE, J.-S. LEE, K.-H. JUNG, B. PARK, D.-Y. LEE, and S.-Y. KIM, Wonkwang University, Iksan, South Korea |
| 3183 | Water Sorption Behavior of Denture Base Materials
J.A. VON FRAUNHOFER1, S.R. DIPALI2, S.J. LECH2, Z.G. LOEWY2, and S. WETTERER2, 1University of Maryland, Baltimore, USA, 2GlaxoSmithKline, Parsippany, NJ, USA |
| 3184 | Denture teeth shade modification using metal oxide tints and composites
J. IMAO1, H. MALMSTROM1, and Y.-F. REN2, 1Eastman Dental Center, Rochester, NY, USA, 2University of Rochester Eastman Dental Center, NY, USA |
| 3185 | Adhesion behavior of laminated thermoforming materials underwater environment
C. IHARA1, T. YAMANAKA2, R. MATSUI1, S. SAITO1, E. ISOYAMA1, H. TAKAHASHI1, and T. UENO1, 1Tokyo Medical & Dental University, Japan, 2New York University, USA |
| 3186 | Mechanical Test for Assessing Early Changes in UV-Radiated Facial Elastomers
C. CHRISTLINE1, B. SALLACH1, T. ANDERSON1, B. SIMETICH1, and M.W. BEATTY2, 1University of Nebraska, Lincoln, USA, 2Nebraska-Western Iowa Health Care System, VA Medical Center, University of Nebraska Medical Center College of Dentistry, Lincoln, USA |
| 3187 | Artificial Aging of Chlorinated Polyethylene and Maxillofacial Silicone Elastomer
H. SHAH, S. MUNISAMY, and T.K. VAIDYANATHAN, NJ Dental School, University of Medicine and Dentistry of NJ, Newark, NJ, USA |
| 3188 | Effect of Additional PMMA Fillers in Composites on Compressive Strength
Y. KONDO1, M. OKUDA1, M. IKEDA1, Y. KADOMA1, K. OKADA2, Y. NOJIRI2, T. NIKAIDO1, and J. TAGAMI3, 1Tokyo Medical & Dental University, Japan, 2KURARAY MEDICAL INC, Okayama, Japan, 3Tokyo Medical & Dental University; COE Program, FRMDRTB at TMDU, Tokyo Medical & Dental University, Japan |
| 3189 | Effects of Filler Surface Treatment of Magnetic Composite Resin
H. SOMA, and Y. MIYAGAWA, The Nippon Dental University School of Life Dentistry at Niigata, Japan |
|
